Gameboy Micro Faceplate Hacking Progress
I’ve been busy with family stuff for the past few days, but I’ve made some progress:
It turns out that my triwing screwdriver IS small enough to work on the micro’s screws. I just had to push hard enough while turning. I disassembled it and tested the leads heading into the connector. There is definitely 1.7 volts headed into the connector, but I still haven’t been able to get a reading from the jack itself. I now have some homemade test leads that are probably thin enough and I’ll try again tonight.
Update (9/28/05): Just tested with my new thin leads. There is no power coming from the strange jack.
John Tokash 